Swim Spa
4.75 mm reinforced Aristech® acrylic. Balboa Water Group® control system. Continuous-flow swim current. 1.5 m depth. Specified for permanent outdoor installation.
4 m, 5 m or 5.95 m configurations · Full stainless steel chassis
The Tide
Defined
The Tide is designed as a permanent outdoor swim spa installation for private residences, hospitality settings and estate environments. It combines a continuous-flow swimming system with a pressurised hydrotherapy jet section within a single reinforced structure.
The 1.5 m depth supports a full swimming stroke — a defining specification that distinguishes this model from standard swim spas at 1.2 m depth.
A permanently installed swim spa defined by continuous-flow current, 1.5 m depth and reinforced Aristech® acrylic construction.
Materials, configuration, site assessment and delivery scope are confirmed in writing before manufacture begins. Site assessment is a required step — not optional.
The filled operating weight of the largest configuration (5.95 m) is approximately 12,840 kg. A reinforced concrete foundation of at least 15 cm is the standard requirement.
Shell and Structural Frame
The Tide is constructed on a 4.75 mm reinforced Aristech® acrylic shell — structurally necessary at this scale given the load of up to 10,800 litres of water. The shell is supported by a full stainless steel chassis for torsional rigidity.
7-Layer Shell Construction
- Layer 1: 4.75 mm Aristech® acrylic interior
- Layer 2: Hand-coated vinyl reinforcement
- Layer 3: Spray-coated vinyl layer
- Layer 4: Spray-coated vinyl and fibreglass composite
- Layer 5: Unsaturated resin and fibreglass composite
- Layer 6: 30 mm high-density foam insulation
- Layer 7: Cabinet insulation cotton — flame-retardant
Structural Frame
- Chassis: Full stainless steel support frame
- Cabinet: WPC exterior — multiple finishes
- Shell colours: Mahogany / Black / Light gray / Dark gray
Continuous-Flow
Swim Current
The continuous current is generated by river nozzles integrated into the swim end wall. These produce a constant, laminar flow stream strong enough for uninterrupted swimming without turning.
- River nozzle technology — laminar flow
- Manual waterproof rotary flow controls
- Lane guide indicator strip on pool floor
- Separate hydrotherapy jet section at spa end
Interior
Equipment
The spa end features an ergonomic seating zone with hydrotherapy jets positioned for shoulders, back, thighs, calves and feet. Integrated LED lighting and Bluetooth audio are included across all configurations.
- Moulded acrylic seating with back support
- Hydrotherapy jets at shoulder, lumbar and foot level
- 34 integrated LED lighting points
- Bluetooth audio — waterproof speakers
- EVA high-density seating cushions
Defined Variants
Two performance profiles define the S-series. The M and L-series increase swim length and hydraulic capacity.
4.0 m — High-Jet
- Dimensions: 2.4 × 4.0 × 1.5 m
- Water volume: 6,800 L
- Jets: 60
- Pumps: 4 × 3 HP
- Ozone: 1 unit
4.0 m — High-Volume
- Dimensions: 2.4 × 4.0 × 1.5 m
- Water volume: 8,600 L
- Jets: 21
- Pumps: 3 × 3 HP
- Ozone: 1 unit
5.0 m — Extended
- Dimensions: 2.4 × 5.0 × 1.5 m
- Water volume: 8,600 L
- Jets: 59
- Pumps: 4 × 3 HP
- Ozone: 1 unit
5.95 m — Full Length
- Dimensions: 2.4 × 5.95 × 1.5 m
- Water volume: 10,800 L
- Jets: 75
- Pumps: 5 × 3 HP
- Ozone: 2 units
- LED points: 34
All configurations share the same 2.4 m width, 1.5 m depth, 4.75 mm reinforced Aristech® acrylic shell and full stainless steel chassis.
Included in
Specification
Structural Elements
- Complete swim spa in selected shell and cabinet finish
- 4.75 mm reinforced Aristech® acrylic shell
- Full stainless steel chassis
- WPC exterior cabinet
- Insulating cover
- Entry steps
Operating Components
- Balboa® control system with thermostat
- 3 to 5 × 3 HP pumps depending on configuration
- River nozzle continuous-flow system
- Hydrotherapy jet system — layout per configuration
- Integrated ozone sanitation
- Floor-level sediment management nozzles
- 34 integrated LED lighting points
- Bluetooth audio — waterproof speakers
Standard Accessories
- EVA high-density seating cushions
Documentation and Coordination
- Site assessment prior to configuration confirmation
- Structural load data for engineer or architect
- Written specification prior to production approval
- Pro forma invoice with confirmed scope and pricing
- Crane logistics coordination
- On-location installation by coordinated partners
- Electrical connection and operational verification
- Water treatment and maintenance guidance
Site Requirements
Foundation
Reinforced concrete foundation — minimum 15 cm thickness, sized to the unit footprint. Load specifications are provided for the contractor or project architect during specification.
Water Supply and Drainage
A dedicated water supply and appropriately sized drainage are required. A full water change on the 5.95 m model involves removing 10,800 litres.
Electrical
- Recommended: 32 A / 3-phase dedicated circuit
- Standard 15 A insufficient for full simultaneous operation
- RCD protection required
- Installation by a licensed electrician is required
- Electrical specifications provided in advance
Crane Access
Shipping crate weighs 2,040 kg gross. Crane placement is required for all configurations. Vehicle access for crane truck must be available within practical distance of the installation point. Access is assessed during the specification stage.
Global Logistics
The Tide is shipped in a reinforced industrial export crate engineered for the scale and weight of a full swim spa. Crane logistics are coordinated as part of every delivery. Delivery terms are confirmed per destination prior to production approval.
- Shipping crate: 810 × 255 × 165 cm
- Gross weight: 2,040 kg
- Maximum water volume: 10,800 L
- Maximum filled weight: approximately 12,840 kg
- Delivery: DDP worldwide
- Crane access: Required and coordinated
- Installation: Coordinated installation partners
Production Certifications
The Tide is manufactured in a production facility holding the following independently audited certifications. These are factory-level certifications, not OxiusPro brand claims.
- CE — European Conformity
- SAA — Australian electrical safety
- RoHS — Restriction of hazardous substances
- ISO 9001 — Quality Management System
Manufacturer Coverage
- Shell structure: Manufacturer states 5+ years
- Electronics: 12-month manufacturer warranty
Exact warranty terms are stated in the written specification. After the warranty period, servicing, maintenance and replacement parts are arranged at the owner's cost.
Extended Coverage
- Extended warranty options available on request
- Post-installation care guidance provided
- Water treatment and maintenance schedule included
Confirmed
Per Project
Due to the scale and weight of this swim spa, the specification process is more extensive than for smaller models. Site assessment is a required step before configuration is confirmed.
- Model selection (S1 / S2 / M / L)
- Shell colour and cabinet finish
- Filled operating weight for structural assessment
- Foundation specification per site
- Crane access requirements
- Electrical circuit specification (32 A / 3-phase)
- Water supply and drainage routing
- Exact warranty terms per component
- Full project timeline including delivery
- Confirmed pricing on pro forma invoice
- Extended warranty options
Confirmed in Writing.
Approved Before Manufacture.
Site Assessment and Specification
Configuration, site conditions and structural requirements are assessed and defined.
Commercial Documentation
A pro forma invoice is issued with full specification, confirmed pricing and delivery scope.
Approval for Manufacture
Production begins after written approval and deposit confirmation.
Delivery and Installation
Crane logistics, placement and installation are coordinated per destination and project scope.
Before You Proceed
- What defines The Tide's swimming capability?
The 1.5 m depth and continuous-flow river nozzle system. The depth supports a full swimming stroke, which standard swim spas at 1.2 m depth cannot.
- Can The Tide be placed on an elevated terrace?
Subject to structural verification. The filled operating weight of the largest model is approximately 12,840 kg. Structural engineer confirmation is required.
- Why is 32 A recommended instead of 15 A?
With up to 5 pumps of 3 HP each, 15 A is insufficient for full simultaneous operation. A 32 A / 3-phase dedicated circuit ensures stable performance.
- Is a site assessment required before ordering?
Yes. Site assessment is a required step before configuration is confirmed. Structural viability, crane access and foundation requirements are defined before specification is finalised.
- What warranty applies?
The manufacturer states 5+ years on the shell structure and 12 months on electronics. After the warranty period, servicing, maintenance and replacement parts are arranged at the owner's cost.
- Are listed prices fully inclusive?
Prices apply to base configurations. Delivery, duties, customs clearance, crane logistics, site placement and installation are confirmed separately per destination and project scope.
Request Your Pro Forma Invoice
Submit your configuration, site details and destination requirements. Specification, pricing and delivery scope are confirmed in writing prior to production.
From USD 48,500
Submit EnquiryEvery order begins with written specification. No manufacture proceeds without your approval.